Carriage bolts Galvanised M8 x 80 mm - 100 pieces

The carriage bolts are made of galvanised steel and have a 4.6 quality. The tensile strength of the carriage bolts is therefore 40 kg per mm2. The carriage bolts m8x80 mm are supplied with nut.

The carriage bolts have a modern look due to the 20 mm wide semicircular head. There is a square section under the head of the carriage bolts. This is approximately 6x6 mm. By tapping the head of the carriage bolt, the square part clamps into the wood. This prevents the bolts from turning while the nut is being tightened. Use a rubber mallet to clamp the carriage bolts. The rubber hammer does not damage the galvanizing layer. This prevents oxidation at the carriage bolts. The M8 nut must be tightened with a 13 mm wrench.

Buy carriage bolts 8x80 mm galvanised steel

Order the carriage bolts galvanised m8x80 mm. Gardeners, Construction and DIY companies get extra benefits with a business account such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.