Strap Hinge Galvanised 70 cm

With this 70 cm strap hinge made of blue galvanised steel, you can easily install fence doors or gate fences. The strap hinges provide a modern and beautiful look. This strap hinge has 4 mounting holes with a diameter of 8 mm. Based on the thickness of the door, you determine which fasteners you use to mount the strap hinges. These strap hinges have a 17 mm eye. This makes the hinges suitable for our 16 mm galvanised hinge hooks.

Tip: Have a look at our range of slide bolts and gate latches to close your gate or fence.

With which bolts do I mount these strap hinges?

You can mount the strap hinges from Wovar with lag screws or carriage bolts. With a door thickness of 35 mm including strap hinge, our M8x30 mm lag screws are sufficient. For thicker doors, it is recommended to attach the strap hinges with our galvanised carriage bolts. Is the door thickness approximately 40 mm? Then use our galvanised carriage bolts M8x50 mm. For a door thickness of 50 mm, choose our galvanised carriage bolts M8x60 mm.

How do I attach strap hinges to my door?

Mount the strap hinges on the same side as the door hinges. Place the strap hinge in the correct place on the door and mark the mounting holes with a pencil. Are you using carriage bolts? Then it is necessary to pre-drill with our 9 mm thick hardwood drill. After drilling, slide the carriage bolts through the hole. The semicircular head of the carriage bolts is on the inside of the door. By tapping the head of the carriage bolts with a rubber hammer, the square portion of the carriage bolts under the semicircular head is clamped into the wood. This prevents the carriage bolt from turning when tightening the nut.

Each stall has 1 square mounting hole. At the square hole, place the carriage bolt with the semicircular head on the same side of the hinge. So that the square part under the semicircular head of the carriage bolt fits exactly in the square hole of the strap hinge. This ensures a solid connection of the hinges.

If you mount the strap hinges with lag screws, you pre-drill a hole with our hardwood drill 6 mm. You will notice that screwing in the lag screw is a lot easier. You mount lag screws in a different way than the carriage bolts, namely the other way around. You screw the lag screw on the same side as the strap hinge. Make sure that each strap hinge mounting hole is provided with a lag screw or carriage bolt.

How many hinge hooks do I need for my garden door?

For doors or gates in your garden that are lower than 120 cm, Wovar recommends using 2 hinges. For higher doors it is recommended to use 3 hinges. By mounting your garden door with 3 handles, you greatly reduce the chance that the door will warp.

Buy galvanised strap hinges 70 cm

Order the modern blue strap hinges passivated for the lowest price at Wovar. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Do you prefer cranked hinges or hinges with a bend? View our entire range of hinges and pintles.