Adjustable Post Holder M20 for 8 x 8 to 10 x 10 cm Posts - Per Piece

Are you looking for an adjustable post holder? Then check out our adjustable post holder M20 8 x 8 cm. This column base has a total length of 250 mm and is 80 mm wide and Suitable for posts of 8 to 10 cm. This column base is adjustable this is possible because the column base comprises several parts. 

• Two steel plates of 80 x 80 mm
.
• M20 Screw thread (250 mm long)
• Two M20 bolts 

 You can make good use of this post holder when creating Carports, Pergolas, Roofs and more. 

M20 adjustable elevated post bases install 8 x 8 

The adjustable elevated post bases are equipped with 8 mounting holes with a size of 11 mm, this allows you to use our M10 coach screws for mounting perfectly. Here's how to best install the pillar base. Make sure you have M10 coach screws, a 7 mm hardwood drill bit, nylon plugs and any M10 washers. Use your 7 mm hardwood drill bit to pre-drill into the wood at the desired location. Then place the post holder mounting holes over the drilled holes and securely fasten with M10 coach screws. Then drill holes at the appropriate locations in the Concrete. Insert nylon plugs into the holes and place the post holder and tighten the M10 coach screws firmly. If necessary, add washers M10 for extra protection.

Buy Adjustable Post Holder M20  

Buy your Adjustable post holder for 8 x 8 to 10 x 10 posts from Wovar at the best price. Companies in the construction and garden industry benefit from extra advantages, such as a fixed business discount.

Don't you want a different colour or size? Then take a look at our entire range of post holders and post holders.