Adjustable Thumb for english gate hardware - Per Piece

Are you going to make your own gate or fence at home? And do you want to make this gate or fence in the beautiful traditional English style? Then this Adjustable Thumb for English gate hardware is very suitable for that! At Wovar you can purchase these for the lowest price. 

Thumb with bolts

The Adjustable thumb has a total length of 325 mm, of which the thread is 275 mm long. The diameter of the thumb is 19 mm. Hinges with a 20 mm eye are thus suitable in combination with these adjustable thumbs. The adjustable thumbs are made of hot-dip galvanised steel. Here, a protective zinc layer is applied to the Material to prevent corrosion of the lower layer. The thumb will therefore not rust easily, making it suitable for Exterior use.

Adjustable thumb

This adjustable thumb is Suitable for English gate hardware and will complete your fence or gate. The thumb is adjustable, allowing you to easily adjust the gate as required. By tightening or loosening the bolts, you can easily adjust the thumb. By drilling a hole through the post, you can easily install the thumbs. You can do this with a 20 mm spade drill bit or a 19 mm spade drill bit. If you choose a 19 mm speed drill bit, we recommend using a small rubber hammer to hammer the thumbs into the post. Because the thumbs are easy to adjust, they are also suitable for skewed posts. 

Buy Adjustable Thumb

Is the Adjustable Thumb exactly what you were looking for? Then place your order quickly at Wovar for a competitive price! View our entire range of gate fittings.