Beam Support Heavy with flange Galvanised for 6.3 x 12.5 cm Beams - Per Piece

This beam carrier 6.3 x 12.5 from Wovar made of galvanised steel is very strong. Beam carriers are also called beam supports. The 22 mounting holes make it possible to screw the beam supports securely. Use these beam carriers when mounting 6.3 x 12.5 cm beams.

Fixing the beam carrier

The beam carrier has a total of 22 mounting holes. 18 mounting holes have a diameter of 4 mm. 3 mounting holes have a diameter of 9 mm and 1 mounting hole is 14 mm wide. The beam support is 1.5 mm thick. We recommend our 3.5 or 4 mm chipboard screws for mounting holes with a diameter of 4 mm. You can fix the larger ones with our galvanised lag screws. Use an M8 zinc plated lag screw for the 9mm holes and an M12 lag screw for the largest 14mm hole.

CE mark

Wovar's steel beam supports have not been tested for load-bearing capacity and do not have a CE mark. If you insist on installing beam holders that have been tested or provided with a CE mark, we recommend choosing our beam supports.

Order beam support with flange 63 x 125 mm

Order this beam carrier for 6.3 x 12.5 cm beams now. Benefit from our high volume discount and order 10 pieces. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this beam support not quite what you are looking for? View our entire range of beam supports or joist hangers here. Are you building a canopy? Check out our very strong wood construction screws.