Carriage bolts Galvanised M10 x 40 mm - 100 pieces

Looking for a secure fit, but you don't need long bolts? Then use these strong galvanised carriage bolts M10 x 40. You use carriage bolts when making wooden constructions such as a roof or conservatory. With these carriage bolts you mount, for example, a 1 cm thick plank on a 2 cm beam. Carriage bolts, also called coach bolts, are always supplied with a nut at Wovar.

This M10x40 mm carriage bolt has a thread on the end and a 24 mm wide convex round head. To install the carriage bolts, pre-drill the wood. This is best done with a hardwood drill bit that is 1 mm thicker than the galvanised carriage bolt itself, so that it easily slides through the wood. Take the 11mm hardwood drill bit for this M10 carriage bolt, for example.

To fix the carriage bolt in the wood, tap it with a rubber mallet. This prevents damage and therefore oxidation. Because the carriage bolt is hammered into the wood, it will not turn when the nut is tightened. This is because there is a square surface under the head of the carriage bolt M10 x 40, which is clamped in the wood.

Order carriage bolt galvanised M10 x 40 mm for home or business

Order this thick carriage bolt each for the lowest price. Companies in the construction and gardening industry are advised to sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.