Carriage bolts Galvanised M10 x 45 mm - 100 pieces

With these carriage bolts M10 x 45 you always work safely, because they are very strong. You mainly use these carriage bolts when making wooden constructions. Think for example of a new roof, conservatory or gate. With these 10 x 45 zinc plated carriage bolts you can easily attach a 1.5 cm thick plank to a 2 cm thick beam. Did you know that all carriage bolts from Wovar come with a free nut? 

These M10x45 mm carriage bolts, also called coach bolts, have a thread on the end and a 24 mm wide convex round head. Drill a hole in the wood to insert the carriage bolt. This is best done with a hardwood drill bit that is 1 mm thicker than the galvanised carriage bolt M10 x 45 itself, so that it easily slides through the wood. In this case, take a hardwood drill 11mm.

Place the carriage bolt in the wood, then tap it so that the bolt carriages into the wood. Due to the square just below the head, it will sit firmly in the wood and will not turn when tightening the nut. Always use a rubber mallet when driving in the carriage bolt to avoid damage to the carriage bolt.

Carriage bolt galvanised M10 x 45 mm order for home or business

Order this thick carriage bolt each for the lowest price. Companies in the construction and gardening industry are advised to sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.