Carriage bolts Galvanised M10 x 55 mm - 100 pieces

With these M10 x 55 mm carriage bolts galvanised you can be sure that the strength of your fastening is excellent, because they have an enormous bearing capacity. With this you always work safely. With these iron strength carriage bolts, you can attach a 2.5 cm beam to a 2 cm beam, for example. This leaves 1 cm to properly tighten the supplied nut. All carriage bolts are supplied with a nut at Wovar.

Drill an 11 mm hole in the wood with a hardwood drill so that the coach bolt can be easily passed through the wood. Give a small tap on the head with a rubber hammer and the square part which is under the 24 mm wide head, clamp itself into the wood. As a result, the bolt no longer rotates with the tightening of the nut. It is important to use a rubber mallet to prevent damage to the carriage bolt. This prevents oxidation from occurring. Then tighten the nut firmly with a wrench or ratchet, after which you are assured of a strong fastening.

Buy carriage bolt galvanised M10 x 55 mm

Order this thick carriage bolt each for the lowest price. Companies in the construction and gardening industry are advised to sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.