Carriage bolts Galvanised M10 x 75 mm - 100 pieces

Looking for a rock-solid fixation when installing a wooden construction? The job is done in no time with these M10 x 75 galvanised carriage bolts. For example, attach a 3.5 cm thick beam to a 3 cm thick pole. These carriage bolts, also called coach bolts, are supplied with a nut at Wovar. We recommend pre-drilling the wood with a hardwood drill to place the bolt. Make a hole that is 1 mm thicker than the bolt itself, in this case 11 mm.

Insert the bolt and tap the 24mm wide semicircular head into wood. Because there is a square surface under the head, it will clamp itself in the wood. As a result, it does not turn when the nut is tightened. It is recommended to use a rubber mallet when typing in to prevent damage. Then tighten the supplied nut with a 17mm wrench. Obviously, make sure that you place a washer in between, so that the nut is properly tightened, but at the same time does not damage the wood.

Buy carriage bolt galvanised M10 x 75 mm

Order this thick carriage bolt each for the lowest price. Companies in the construction and gardening industry are advised to sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.