Carriage bolts Galvanised Black M6 x 60 mm - 25 pieces

These black carriage bolts M6 x 60 mm are the solution for mounting black hinge bolts with a 10 mm eye. The length is measured from the bottom of the semicircular head to the end of the post. With 60 mm long carriage bolts it is possible to mount the hinges on 5 cm thick doors. In total, this black carriage bolt has a 20 mm screw thread. The diameter of the semicircular head is approximately 15 mm.

Wovar supplies these black carriage bolts complete with nut and washer. The ring ensures that, for example, hinges are not damaged when the nut is tightened. Carriage bolts are also called wood bolts. Black wood bolts 6 mm thick can be pre-drilled with a hardwood drill bit 7.0 mm.

The black carriage bolt is made of galvanised steel. Galvanised steel is very strong and has an enormous load-bearing capacity. After the zinc layer, a black delta-col coating has been applied. This not only provides a beautiful appearance, but also protects the carriage bolts better against rust. The semicircular head is completely intact and colors very nicely with coniferous wood. The square part under the head is approximately 5 by 5 mm. By tapping the head with a rubber hammer, this part clamps into the wood. This prevents the bolt from turning when tightening the nut.

Buy wood bolts black M6x60 mm

Order black carriage bolts m6x60 mm for the lowest price at Wovar. Companies in the construction and gardening industry are advised to sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt not quite what you are looking for? View our entire range of carriage bolts black. In addition to black carriage bolts, Wovar also supplies zinc plated carriage bolts and stainless steel carriage bolts.