Carriage bolts Galvanised M8 x 20 mm - 200 pieces

With the galvanised M8 x 20 mm carriage bolts from Wovar, you will be ensured a sturdy fastening. The galvanised steel makes them suitable for heavy constructions. The carriage bolts have a steel quality of 4.6, which gives a tensile strength of 40 kg per mm2. These 20 mm long galvanised carriage bolts are suitable, for example, for attaching thin strips to each other. They are, like all other carriage bolts at Wovar, supplied with nut. 

Fully pre-drill the material to be attached with a 9 mm thick drill. If you are going to fix wood, use our strong hardwood drill 9 mm. Bring the carriage bolt through the wood and hammer it into the wood. Due to the square part under the approximately 20 mm wide head, it will clamp itself in the wood and will not turn when inserting the nut. Tap in the carriage bolt with a rubber hammer, so that it does not get damaged and no oxidation occurs. Use a 13 mm open-end or ring spanner to tighten the nut.

Order carriage bolts galvanised M8 x 20 mm

Order our high-quality carriage bolts galvanised and discover the very strong quality. Gardeners, construction and DIY companies get extra benefits with a business account.

Is this carriage bolt galvanised not quite what you are looking for? Then view our entire range of zinc plated carriage bolts. In addition to galvanised carriage bolts, Wovar also supplies stainless steel carriage bolts and black carriage bolts.