Chipboard screws Galvanised 4.5 x 30 mm Pozidriv - 200 pcs

These galvanised chipboard screws are equipped with a pozidrive, a star-shaped drive that provides extra grip for a screwdriver or power drill. On top of that, the screws have been coated with a special wax that reduces the amount of power the drill needs to fasten a screw. The result is that you can fasten more screws with the same battery.

Chipboard screws are great for fixing metal or plastic to wood. These screws can also be used for wood-to-wood connections. However, this will result in a slight gap between the two pieces of wood. If you want to prevent this from happening, you will have to pre-drill the holes. You could also use partially threaded screws instead of these screws with full thread.

Note: Are you working with hardwood? Then we recommend pre-drilling with a 3 mm hardwood drill bit to prevent the wood from splitting.

Chipboard screws 4.5 x 30 mm

The best bits to use for these chipboard screws are PZ-2 bits. These have been made specifically for the pozidriv of these screws.

The screws are made of hardened galvanised steel. With a special heat treatment, the screws are galvanised. They are heated to a high temperature, and then immediately cooled down. This treatment galvanises the steel and protects it against corrosion. Galvanised steel is also stronger than stainless steel or regular steel. 

Ordering chipboard screws 4.5 x 30 mm

Order your galvanised chipboard screws 4.5 x 30 mm for a competitive price today. Wovar's business clients enjoy even more advantages with a free business account.

Is this not quite the screw you want? Check out all of our pozidriv chipboard screws, or browse our entire range of chipboard screws. Need a different type of screw? Have a look at our deck screws, garden screws, wood construction screws, or simply explore our 'Fasteners' category.