Chipboard screws Galvanised 6 x 90 mm Torx 30 with cutting point - Box 200 pcs

The galvanised torx screws from Wovar are made of strong galvanised steel. The 6x90 mm chipboard screw has a Torx 30 drive and a countersunk head. The galvanised chipboard screws are packed in boxes of 200 pieces. For fastening, it is recommended to use matching Wovar Tx 30 bits to prevent damage to the screw.

Chipboard screw torx galvanised from Wovar

The countersunk head of the Wovar chipboard screws sink nicely into the wood while screwing in the screw. The milling ribs on the underside of the head ensure that the screw is pulled forcefully into the wood. The galvanised chipboard screws 6 x 90 mm are partly threaded. This makes the screw very suitable for wood on wood constructions. Because of the partial wire, the wood pulls hard against each other.

The saw cut at the end of the screw ensures that the screws have a cutting point. The cutting tip makes pre-drilling unnecessary and ensures that even the thinnest wood does not split. Do you work with hardwood? Then use our stainless steel 410 chipboard screws.

Order Torx Screws galvanised 6 x 90 mm

Discover our high-quality chipboard screws! Gardeners, handymen, and construction companies benefit from additional advantages with a business account.

Are these chipboard screws not quite what you are looking for? View all our chipboard screws galvanised torx. In addition to this galvanised partial thread screw, see our full thread screws or chipboard screws stainless steel A2.

These chipboard screws also serve as fence screws! These are special screws that you use to mount fence boards or screens. At Wovar you will find a wide range!