Door handle with backplate aluminium block model - Per Set

These door handles with shield, are made of high-grade aluminium and are also called block model. These are the most common door handles in houses of housing associations. This set of door hardware includes two door handles, one of which comes with a pre-assembled door handle pin. Also included are two matching Aluminium door handle backplates. There are two screw holes in these door handle backplates for fastening to the door. 

It is very important that you choose the right variant locking method of the Door handle backplate to match your door lock. You will measure the correct size by measuring the centre-to-centre distance from door handle to keyhole. Available sizes in this are:

Sizes available in this are:

Last chance!

Blind; Suitable for Interior doors that are not lockable, so-called wicket doors
SL56; Suitable for keyhole with a centre-to-centre distance to door handle of 56 mm
SL72; Suitable for keyhole with a centre-to-centre distance to door handle of 72 mm
PC55; suitable for cylinder locks with a centre-to-centre distance to door handle of 55 mm
PC72; suitable for cylinder locks with a centre-to-centre distance to door handle of 72 mm

Choose the right size Door handle backplates to go with your door handles for your interior doors, this way you will have the same handle on each door which ensures a nice look. For a complete overview of all our door handles with shields, check out the full selection door hinges on shields.

This way you will have the same door handle on every door which will provide a nice look.

Door hardware aluminium

• Door handle: Has a length of 11 cm and a width of 1.9 cm. The distance from the door handle backplate to the top of the door handle is 4.8 cm.

  Door handle backplate: has a length of 11 cm and a width of 1.9 cm.

• Door handle backplate: Has a length of 18 cm and a width of 4.1 cm. Wovar recommends 4 x 25 mm Galvanised screws or matching patent screws for mounting. Don't have these yet? Then easily include them in your order.

  Mounting Aluminium door hinges on shields

  1. Place the door handle backplates against the door on both sides of the door.
  Draw the crank hole, any keyhole or cylinder lock and the mounting holes of the door shields with a Carpenter's pencil.
  2. With a carpenter's pencil you can mount the door handle backplate.
  3. Use a butterfly drill bit to easily drill out the holes for the door handle and any keyhole 
  .
  4. Pre-drill the mounting holes lightly with a 2 mm hardwood drill bit for screws ó with a 4 mm drill bit for patent screws.
  5. Fix the Door handle backplate to the door with the full-thread screws or patent bolts. 
  6. Place the door handle with the handle spindle in the door and attach the loose door handle to it with the supplied fixing ball. Tighten it firmly with a 3 mm allen key.

  Door handle with shield aluminium order

  Now order your door handles with shield aluminium at Wovar!