Expansion bolt M6 x 75 mm for pre-drilling - Per Piece

With this expansion bolt M6 x 75 mm for pre-drilling, it is possible to fix material in different surfaces. This concrete anchor can not only be used in concrete, but can also be fixed in natural stone, solid and hollow masonry, sand-lime brick and light concrete blocks. The expansion bolt is placed by means of a pre-drilling installation, which means that a hole must first be pre-drilled in the wall and only then in the material to be attached. This makes it possible to easily attach the material after the expansion bolt has been placed.

Use a 10 mm concrete or hammer drill bit to drill a 45 mm deep hole in the wall. Then place the expansion bolt in the hole and, if necessary, carefully hit it with a hammer until the expansion bolt with the top cylinder is in the wall. The side with the nut and washer will therefore be just outside the wall. Proceed to tighten the nut firmly with a size 10 ring spanner. You will see that the expansion bolt does not turn. As the nut is tightened, the bolt expands on four sides and attaches securely to the wall. It is possible to attach material up to 15 mm thick. Be careful not to overtighten the expansion bolt. This way you can prevent concrete or stone from breaking.

Buy expansion bolt M6 x 75 mm

Benefit from a substantial volume discount at Wovar when purchasing 100 or 200 items. Do you have a construction, handyman or landscaping company? Then quickly create a business account to take advantage of extra benefits such as a discount. Are you looking for a different size expansion bolt? Then view our entire range of expansion bolts. Or see our expansion bolts with push-through installation.

Are expansion bolts not quite what you are looking for? Also view our impact plugs, frame plugs or frame screws.