There are currently no items in your basket
Expansion bolt with hook M10 x 110 mm - Per Piece
View our volume discount below:
Why choose Expansion bolt with hook M10 x 110 mm - Per Piece?
- Extremely strong anchoring
- Supplied alongside nut and washer
Product details
Brand | Wovar |
---|---|
SKU | WV004141 |
EAN code | 7141269039196 |
Feature 1 | Large spreading range |
Feature 2 | Suitable for lower quality building materials |
Type | Anchor bolt |
Length | 110 mm |
Material | Galvanised steel |
Dimensions | 10 x 110 mm |
Application | Concrete / Stone |
Expansion bolt with hook M10 x 110 mm - Per Piece
Are you looking for a product to attach heavy objects to concrete or brick? Then these expansion bolts with hook M10 x 110 mm are the solution for you. The expansion bolt is made of countersunk steel which makes the expansion bolt extra strong. Thanks to this sturdiness, it is possible to attach objects with a high load to a wall. Certain objects such as pulleys or wind or sun screens.
Fixation in several surfaces
This expansion bolt with hook can be attached to even more surfaces than just concrete or brick. The expansion anchors can also be applied in natural stone, solid and hollow masonry, light concrete blocks and sand-lime brick. The expansion bolt has a total length of 11 cm, including the hook. The hook of the expansion bolt has an inner diameter of 12 mm and an outer diameter of 31 mm. The circumference of the hook is 8 mm.
How do you attach this expansion bolt with hook?
Pre-drilling is necessary before you can place the expansion bolt. The size M10 x 110 is pre-drilled with a 16 mm concrete or hammer drill, the hole must be 65 mm deep. Then place the expansion bolt in the hole and, if necessary, carefully hit it with a hammer until the expansion bolt with the top cylinder is in the wall. You will then see that the side of the washer and nut are just outside the wall.
Tightening the nut
Proceed to secure the expansion anchor by tightening the nut firmly. By tightening, you will notice that the expansion bolt stays in place and gets stuck. When you tighten the nut, the bolt expands on four sides for an extremely secure fit. To tighten the nut properly, use an M17 ring spanner.
Need an expansion bolt with hook M10 x 110 mm?
Benefit from a substantial volume discount at Wovar when purchasing 25 or 50 items. Do you have a construction, DIY or landscaping company? Then quickly create a business account to take advantage of extra benefits such as a discount. Are you looking for a different size expansion bolt with hook? Take a look at our entire range of expansion bolt with hook to see if this is the right size for you.
Are expansion bolts not quite what you are looking for? Take a look at our impact plugs, frame plugs or frame screws, for example.