Black Galvanised Farmer's Gate Latch Set

This farmer's gate latch set from Wovar is made of black powder-coated steel and is often used in combination with our black hinges. The farmer's latch set is powder-coated black and ensures a well-closing gate or garden door. The bolt is 160 mm long. The plate of This farmer's latch set is 120 x 85 mm and has 6 screw holes.

This black farmer's latch set is supplied without screws and can be securely fastened with our 4 x 30 mm black Galvanised garden screws. Pre-drilling in softwood is not necessary. This is recommended for hardwood. You can use our hardwood drill bit 3 mm thick for this.

Mounting a lever latch

Mounting a lever latch is a simple job that can be done by one person in a few minutes. In addition to a lever latch, you will need a drill with a Torx 20 bit, galvanised garden screws 4 x 30 mm, hardwood drill bits 3.0 mm, 7.5 mm, and 13.0 mm thick. Position the backplate about 2 cm from the edge of the gate, and mark where the screws and the handle need to go. Drill the hole for the handle, and pre-drill the holes for the screws, if necessary. Attach the backplate to the gate. Insert the drop bar on one side of the gate. After placing the rosette around the handle, insert the handle in the hole in the gate and the drop bar. Fix the rosette to the gate and place the pin in the hole at the back of the handle to secure it. Finally, install the catch on the post/wall/fence next to the gate.

Ordering your Black Farmer's Gate Latch Set online

Order this beautiful black farmer's gate latch set for the lowest price at Wovar! The farmer's latch set provides a beautiful end result in combination with our black hinges. Companies get extra benefits with Wovar. Register your company today and receive a personal discount code!