There are currently no items in your basket
Joist Hanger Heavy Galvanised for 5 x 9.5 cm Beams - Each
View our volume discount below:
Why choose Joist Hanger Heavy Galvanised for 5 x 9.5 cm Beams - Each?
- Competitively priced
- Extra strong
- 23 mounting holes
Product details
Brand | Wovar |
---|---|
SKU | WV004954 |
EAN code | 8720039648937 |
Feature 1 | Net size: 59 x 95.5 |
Type | Joist hanger |
Width | 5.80 cm |
Material | Galvanised steel |
Net size | 5.9 x 9.55 cm |
Beam size | 5.8 x 9.5 cm |
Adjustable | No |
Dimensions | 58 x 95 mm |
CE-certification | Yes |
Joist Hanger Heavy Galvanised for 5 x 9.5 cm Beams - Each
This joist hanger is suitable for mounting 5.8 x 9.5 cm beams. The joist hangers are made of galvanised steel and are therefore very strong. The 23 mounting holes makes mounting the joist hangers very easy. The CE mark means that the joist hanger meets the legal requirements in the field of safety, health and the environment. Use our stainless steel 410 or galvanised chipboard screws for installation.
Fitting the joist hangers
Wovar joist hangers are suitable for heavy-duty cross beams. The net inner size of this joist hanger is 59 x 95.5 mm. Are you mounting the joist hangers on stone or concrete surface? Then it is necessary to pre-drill. Marking is easy by holding the joist hanger in the right place and marking the mounting holes with a pencil. Remove the joist hanger and you can start drilling. Because the joist hangers are made of galvanised steel it is important that they are not damaged. In this way you prevent the joist hangers from oxidizing.
This joist hanger has 23 mounting holes to fix, the hole pattern of which is: 18 holes of 5 mm, 1 hole of 7 mm and 4 holes of 11 mm.
How strong is this joist hanger?
Below you will find a table in which the load-bearing capacity of this joist hanger is shown for T-joints from wood to wood. The image on the right shows what the abbreviations DR, DW and T stand for. For example, DR means the load-bearing capacity downwards, DW the lateral strength and T the force of the beam or wall. The load-bearing capacity was tested with a total of 18 galvanised screws 5 x 35 mm. It is recommended to use a minimum of 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 18 pcs.
Attachment | with Nails | with Screws |
DR | 983 KG | 2260 KG |
DW | 1091 KG | 2672 KG |
T | 129 KG | 1338 KG |
The load-bearing capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use a minimum of 4.0 mm screws *
Order joist hangers
Order at least 20 section carriers and take advantage of our volume discount. Companies always benefit from the lowest price at Wovar. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.
Is this joist hanger not quite what you are looking for? View our entire range of joist hangers or beam support here. Are you building a canopy? Also check out our strong wood construction screws.