Joist Hanger Heavy Galvanised for 9.5 x 24.5 cm Beams - Each

This joist hanger is suitable for mounting 9.5 x 24.5 cm beams. The joist hangers are made of galvanised steel and therefore very strong. The 77 mounting holes makes mounting the joist hangers very easy. The CE mark means that the joist hanger meets the legal requirements in the field of safety, health and the environment. Use our stainless steel 410 or galvanised chipboard screws for installation.

Fitting of joist hangers

Wovar joist hangers are suitable for heavy-duty cross beams. The net inner size of this joist hanger is 95 x 232 mm. Are you mounting the joist hangers on stone or concrete surface? Then it is necessary to pre-drill. Marking is easy by holding the joist hanger in the right place and marking the mounting holes with a pencil. Remove the joist hanger and you can start drilling. Because the joist hangers are made of galvanised steel, it is important that they are not damaged. In this way you prevent the joist hangers from oxidizing.

This joist hanger has 77 mounting holes to fix, the hole pattern of which is: 59 holes of 4 mm, 10 holes of 9 mm and 8 holes of 14 mm.

Order joist hangers

Order at least 20 joist hangers and take advantage of our volume discount. Companies always benefit from the lowest price at Wovar. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist hanger not quite what you are looking for? View our entire range of joist hangers or beam supports here. Are you building a canopy? Also check out our strong wood construction screws.