Pipe Flush bolts Galvanised 160 x 17 x 12 mm Chamfered - Per Piece

These pipe flush bolts are often used on double log cabin doors and ensure that the "fixed door" finds its locking in bottom and top lintel of the frame. On this fixed door, 2 pipe edge sliders will be used, 1 at the top of the door and 1 at the bottom. This will also prevent the door from warping. This pipe edge slide is rounded at the end, which makes it suitable for the rebates often milled into these log cabin doors from the factory. Measure well in advance whether this model will fit in the rebate, the length is 160 mm, the width is 17 mm and the depth is only 12 mm.

Installing pipe cantilever

Installing the pipe flush bolts is very easy, in the model there are 2 mounting holes suitable for 3.0 x 40 mm screws. We do not supply these screws as standard, so you need to add them to your shopping cart yourself. You will find the screws, together with the appropriate drill bits, in the corresponding articles on this page. You can pre-drill the screw holes in the door with our 2 mm hardwood drill bits to prevent the thin screws from breaking. You then install the supplied strike plates in the top or bottom lintel of your frame. Before you do this, drill an 8-mm hole exactly where the bolt will enter the frame. An alternative to flush bolts are espagnolettes, but they are a Piece more present on your door due to surface mounting. Apart from flush bolts, you can also find all the other hardware and door hardware you need for your log cabin door at Wovar. Do you have a construction or landscaping company? Then with a business account, you will benefit from even more advantages such as a fixed discount on all your orders.