Post holder on plate 7.1 x 7.1 x 15 cm - Per Piece

You mount these 7x7 post holders on plate to solid surfaces with coach screws. The length you then use depends on the surface. 8 x 30 mm coach screws are sufficient for a hardwood decking. For a concrete base, coach screws 8 x 40 mm are recommended in combination with our 8 x 40 nylon plugs. Pre-drilling is necessary for both stone / concrete and hardwood. For hardwood, use our hardwood drill bits 6 mm. Use an 8 mm masonry drill bit with stone or concrete. Each point post holder has 4 screw holes. Fix the posts with our strong coach screws or galvanised screws 5x50 mm. Order these footrests for a concrete floor or opt for a pointed variant for placement in the ground.

How do I mount 7x7 posts in the flat post holder?

To screw posts into the post holders, 8 x 30 mm lag screws are recommended for 71 x 71 mm posts. Don't forget to place our washers between the lag screws and the post holder. This will prevent the lag screws and post holders from rusting together. The washers also protect the post holders during the mounting of the lag screws.

Buy post holder base for 70x70 mm bollards

Order these 71x71x150 mm post holders on plate for firmly fixing posts on a hard surface. Take advantage of our volume discount and order a minimum of 10 items. Companies in the construction and garden industry benefit from extra benefits such as discounts with a business account.

Is this post holder not quite what you are looking for? View our entire range of post holders or flat post holders here. We also offer handy pergola connectors for making pergolas.