Postsaverâ„¢ Post Protector Sleeve for Square Posts of 90 x 90 mm - Per Piece

Looking for long-lasting protection for your wooden posts? Extend the life of impregnated wood, such as Douglas fir, pine, and spruce, using the Postsaver post protector from Wovar . Moisture and fungi no longer have any influence, so your wooden construction will last twice as long. This post protector is 35 cm long and can be used for square posts of 90 x 90 mm.

Applying the 90 x90 mm Post Protector Sleeve

The post protector has an outer layer of heavy polyethylene and an inner layer of fusible bitumen. During application with a gas or paint burner, the inner layer melts, so that it adheres firmly around the post. The post protector now fits tightly around the post and acts as a protective layer. Because the Postsaver is applied at the point of air and ground, the post will not rot.

Instructions

With square posts, it is useful to burn side by side. For good adhesion, use a wet paint roller to roll over the Postsaver after it has shrunk to one side of the post. Then repeat this procedure for the next sides until it is snug on all sides. Let the Postsaver cool down for a while, then the post can be used and you can place it in the desired place, normally into the ground.

Buying your Postsaver™ for Square Posts

Buy your post guards now at Wovar for the lowest price! You also benefit from an attractive volume discount when purchasing 10 or 20 pieces. Do you have a construction, Handyman, or landscaping company? Then quickly create a  business account and take advantage of extra discounts and many other benefits. 

Are you looking for a different size post protector or are you looking for a protector for square posts? Then take a look at our extensive range of post protectors. Would you rather not place the post directly into the ground? View the complete range of post holders. Here you will find pointed post anchors, flat post holders, column bases, and elevated post bases.