Putty knife 30 mm wooden handle - Per Piece

This is the putty knife with the narrowest 30 mm blade in Wovar's range. This has the advantage that you can work very precisely with it. This variant is therefore intended to fill and repair smaller holes or irregularities. This putty knife is therefore very suitable to use, for example, for window frames. This putty knife has a Wooden handle that always lies firmly in the hand. 

How to putty:

• Make sure your putty knife is always clean and flat. 
• When puttying, use two knives, one to apply the putty with, and one to put put putty stock on top. 
• The putty knife is best used at a 45-degree angle. 
• Pull the putty knife over the hole in a smooth motion and remove excess putty immediately. 
• Tip:Make sure to bump the puttyed hole. As filler shrinks during the curing process, you will see that you are left with enough filler to sand nice and flat. 

Order putty knife 30 mm

Order your good quality 30 mm putty knife from Wovar. Then take a look at our other putty knives in the hand tools category. Are you going to paint a certain surface area? Then also have a look at our painter's tape to work tight.