Quadrant arm stay 18.5 cm Galvanised - Per Piece

Quadrant arm stays are simple catch brackets which catch your bottom hung, casement or tilt window after it is unlocked. You place these brackets on your window frame, leaving your window ajar. This allows you to ventilate your home perfectly. You decide where to place these catch brackets; the further up you place the bracket, the less your window will remain open. A good starting position is about half the total window height, see also figure 2. By placing the drop brackets at a slight angle, your window will fall in well here. Moreover, the installation is quite easy, but in most cases you will have to chisel a Piece out of your frame so that the sash hooks disappear into it. Securing the Quadrant arm stays is done with our 4 x 30 mm Galvanised screws, which fit nicely into the 2 mounting holes. You will need 2 Quadrant arm stays per window. As a result, your tilt window will fall into this perfectly and fit nicely. This provides the most support to your sash window. Trap windows are characterised by the Hinges which are located at the bottom of the window. At the top of the window there is often a window latch, which provides the Anchors. This Window latch can be found in the corresponding articles.

The main disadvantage of these traditional Quadrant arm stays is that they always protrude, even when the window is closed. Should this not be desirable, we recommend our Roller arm stays. These Roller arm stays fall away against the frame as soon as the window closes, look for these window stays in our assortment of hopper window hardware.

Order hopper window hardware

Wovar supplies a large assortment window hardware and even matching door hardware, so you can make your interior completely in your desired style. Buy hopper window hardware extra cheaply at Wovar at very competitive internet prices. Moreover, construction and handyman companies enjoy extra benefits, such as a fixed discount, with a business account.