Roof edge trims Aluminium Inner corner 4.5 x 4.5 x 50 cm - Per Piece

Finish your flat roof of your roofs or log cabin nicely with Wovar's Aluminium roof edge trims inside corner. 

Make sure to finish off your flat roof with Wovar's aluminium roof edge trims.

This roof edge trim is made of Aluminium and is 50 cm long, 4.5 cm wide, 4.5 cm high and has an angle of 90 degrees. By the way, you can combine and connect this corner piece with our long straight roof edge trims round and the outside corner roof trim.

This corner piece can be combined and connected with our long straight roof edge trims round and the outside corner roof trim.

Stainless steel self-tapping screws stainless steel for roof edge trims

.

To secure this corner trim, we recommend using our Waterproof self-tapping screws with Nylon washers. By using these screws, you do not need to pre-drill any holes and ensure a Waterproof mounting. In addition, our self-tapping screws are made of Stainless steel, which also makes them resistant to rust and corrosion.

.

Mounting Aluminium inner corner roof edge trims

Mounting a corner piece is quite easy. All you need for installation is a drill with a TX25 bit and our Waterproof self-tapping screws. 

Step 1: First of all, determine the location of the corner piece.
Step 2: Then screw it in at least two places. This will keep it securely fastened to your roofs. 

Tip: For extra convenience, you can still choose to slightly pre-drill the screw holes. Are you using our Waterproof self-tapping screws? Then a 3 mm metal drill bit will suffice. Then place the self-tapping screws on the corner piece and tighten the screw. Take care to tighten it. Is a roof edge trims not quite what you are looking for? Then take a look at our complete range of aluminium profiles. Wovar also supplies roof edge trims round and aluminium L-profiles.

.