Security hinge SKG 3 Star with ball bearing 89 x 89 mm stainless steel with Round Corner - Per piece

Make your home or property less prone to burglary by using our SKG*** Hinges with ball bearings. These SKG*** Hinges security pin, also known as a thief's claw, which make it harder for burglars to lift your door or window from the frame.

Stainless steel ball bearing hinges 89x89 mm with thief's claw

This ball bearing hinge with thief's claw is made of Stainless steel and has a loose pin. Due to the ball bearing mechanism, this Hinge works very smoothly and almost noiselessly. In addition, due to the properties of stainless steel, this hinge is resistant to rust and corrosion.

The dimensions of the security hinge are 89 x 89 mm in open position and the security pin is 18 mm high.

These security hinges have a load-bearing capacity of approximately 100 kg per four pieces. An average interior door weighs about 40 kg, so you would have enough with two Hinges. However, to ensure solid mounting, we always recommend using at least four.

In addition, one of the requirements to meet the SKG 3-star classification is to also use at least four of these Hinges. If you use only three, for example, you will drop to a 2-star rating. If you don't already have these, you can easily order them with us. In addition, you will need a 16 mm butterfly drill to drill the hole for the thief's claw. You will drill this hole about 20 mm deep. 

In addition, you will need to make a recess for the hinge to work properly. You do this by drawing an outline of the Hinge at the place where you are going to install it. Then use a hammer and chisel to make a 3 mm deep recess for the Hinge to sink into. Need another hammer or chisel? You can find these in the hand tools category under woodworking.

Tip:If you need to make a cut-out for your Hinges yourself, use our router jigs for Hinges for the fastest and best results.

Is your door or frame made of hardwood? Then pre-drill the screw holes about 10 mm deep. Use our 2.5 mm hardwood drill bit for this.

In the attached image, you can see how many and how to place the Hinges to meet the SKG classification. Keep in mind that the bottom two screws must be screwed at an angle into the frame in the case of an inward-facing door.

Stainless steel security hinges 89x89mm with ball bearings order

Order this Stainless steel security hinge with ball bearings at an attractive price at Wovar. 

Order this Stainless steel security hinge with ball bearings at an attractive price at Wovar.

Do you have a construction or handyman's business or are you a landscaper? Then Gripping your extra advantage with a business account and enjoy, among other things, a fixed discount and your own contact person! 

Is a security hinges not quite what you are looking for? Then take a look at our full range Hinges. Besides security hinges, we also supply standard hinges, ball bearing hinges, paumelle hinges, bucket hinges, louvered door hinges, backflap hinges, piano hinges and black hinges.

We also supply standard hinges, ball bearing hinges, paumelle hinges, backflap hinges, piano hinges and black hinges.