Express Nails 6 x 40 mm - 100 pieces

With these clamping sleeves 6 x 40 mm you can easily attach material to a concrete or stone (solid masonry) surface. A spring pin is widely used for attaching, for example, rafters, battens and other types of beams. Activities for which the clamping sleeve is used, for example, are assembling a frame, placing scaffolding or making racks.

Using the spring pin is very simple. First drill a hole. This hole can be pre-drilled in one go in both the material to be fixed and the substrate, which is called push-through mounting. It is best if the clamping sleeve spreads out over the entire length of the drill hole. To drill the hole, use a concrete or hammer drill. The drill hole should be slightly narrower than the diameter of the spring pin. The concrete does not expand when the clamping sleeve is hammered in. In this way, the spring pin will fit properly and firmly.

Order Express Nails 6 x 40 mm - 100 pieces 

You will find cheap clamping sleeves at Wovar. Do you have a construction, DIY or landscaping company? Then quickly create a business account to take advantage of extra benefits such as a discount. Are you looking for a different type of anchoring? Also view our hammer fixings, frame fixings or frame screws.