Deck Screws with Anti Rust Coating 5 x 60 mm for Oak and Garapa Hardwoods - Box 200 Pieces

Deck Screws with Anti Rust Coating 5 x 60 mm for Oak and Garapa Hardwoods - Box 200 Pieces

Anti Rust Coated Deck Screws 5 x 60 mm are made for hardwoods with tannic acids, like Red Cedar and Garapa wood. The 5 x 60 mm decking screw is provided with a special anti-rust coating, which offers protection against tannic acids. Tannic acids are found in many hardwoods. The Anti Rust coating on this screw protects it against this. This coating has a special brown colour. You do not have to worry that this coating will be damaged when the decking screw is screwed in. The anti-tannic acid coating has a self-healing effect. As a result, minor damage is not dangerous.

Screw against Black Spots

When using decking screws that do not have a protective anti-rust coating, you will suffer from black spots on your hardwood decking within 48 hours. This is the work of the tannic acids contained in the wood. Therefore, always use our special screws with protective Anti Rust coating for Accoya, Oak, Garapa, and Red Cedar wood. Thanks to the brown colour, small head and milling ribs, and type 17 cutting point, this decking screw is hardly noticeable!

Now that you have found the perfect screw for your decking, go for a nice finish. You can use our countersink bits and decking spacers for this. Use a countersink bit to insert the drill head just a little deeper into the woodwork. As a result, the screw no longer protrudes, but it falls nicely into the decking board. Use the decking spacer to mount all your deck boards at the same distance from each other. This has plates of 5, 7, 8 and 10 mm, perfect for most types of wood. The handy design ensures that the spacer does not fall between the boards.

Deck Screw 5x60 mm with Anti Rust Coating for Oak, Garapa, and Red Cedar

The Deck Screws with Anti Rust Coating 5 x 50 mm for Oak, Garapa, and Red Cedar woods have partial threading, for a tighter pull. Do not forget to pre-drill with a 3.5 mm thick hardwood drill bit. This ensures that the screw goes straight into the wood. It also greatly reduces the chance of breaking the screws! The Torx 25 impression ensures that your machine does not slip when screwing in the screw.

The lower part of the thread is serrated. This makes it easier to cut through hardwood. Always use high-quality Torx 25 bits from Wovar to prevent damage to the head. This screw is made of galvanised steel, which makes it extremely strong. Thanks to the applied coating, the decking screws do not rust. It is also resistant to tannic acid. This is the reason these rust-free screws are also referred to sometimes as stainless steel decking screws.

Milling ribs are located under the countersunk head. These provide a nice countersink in the wood. Do you want the head to disappear completely into the wood? Then use our 4 mm countersink drill. Just drill for 3 seconds, and you will see that the head sinks in beautifully!

Order Decking Screws with Coating for Hardwoods

Deck Screw 5x60 mm with Anti Rust Coating for Red Cedar, Garapa, and Oak are supplied in boxes of 200 pieces. Gardeners, construction, and DIY companies receive extra benefits with a business account.

Is this not quite what you are looking for? View all our hardwood screws with Anti Rust coating. See also our galvanised garden screws and strong Stainless Steel 410 garden screws.