Stainless Steel Wovar B-Fix Hidden Deck Fasteners - Box of 100 Pieces

Are you looking to install your decking without leaving visible screws on the boards? Then use these handy stainless steel hidden fasteners. The B-Fix One Stainless Steel Hidden Deck Fasteners brought to you by Wovar, are easy to assemble and therefore ensure a lightning-fast assembly of your decking or terrace. The fasteners are made of stainless steel, so they do not rust. They are suitable for decking boards from 20 to 28 mm thick and boards of various widths. For example, it is possible to use them for decking boards of 90 mm, 120 mm, 140 mm, and 145 mm wide. The fasteners are also available in black.

For which Types of Wood is this Fastener Suitable?

The B-Fix fasteners cannot be used for every kind of plank. Choose a stable hardwood from durability class 1 or 2 that does not work too much. Examples include bankirai, ipé itauba, padouk, garapa or larch. Even artificially dried coniferous woods can be used for these decking fasteners. Woods that work too much can shoot out of the fasteners and become warped over time. Use planks that are 20 to 28 mm thick. On the other hand, we recommend using planks of a maximum of 365 cm. Because the longer the plank is, the more difficult it will be to install.

How do I Attach the Clips for Invisible Deck Board Fastening?

Installing these B-Fix fasteners is quite simple and saves a lot of time when installing the decking. To attach the first and last plank, use the B-Fix edge fasteners, which can be found with the corresponding products. You place the fasteners on each joist. Preferably, place a joist every 30-35 cm. You simply slide the fasteners into the rebated plank and attach it to the joist. Make sure that you fasten the screw loosely at first so that you can slide the plank into the fastener afterward. After pushing the plank, finally, tighten the screws firmly. This can be done between the boards because there is a gap of 5 mm between the boards. The fasteners are by default available with 100 pieces of stainless steel screws 5 x 35 mm with TX 20 bit.

How many clips do I need?

The number of fasteners you will need depends on the width of the board and the number of joists you are using. When we assume that the joists are placed every 35 cm, with 1 box you lay approximately 6 m2 with a board width of 140 or 145 mm, and with a board width of 90 mm this is 4 m2.

Deck Board Ending Seam

Keep in mind that you use two fasteners for a crosscut seam. It is not possible to attach two planks to 1 fastener, because there is too small a part of the fastener in the plank. Keep in mind that there is enough space for that on the bottom bar. It is important to provide sufficient sub-beams, so place a sub-beam every 30-35 cm.

Ordering your Stainless Steel B-Fix Clips

Order these fasteners for the invisible installation of your decking boards now for a competitive price at Wovar. Do you have a handyman or landscaping company? Then take advantage of our many benefits with a business account.

Looking for different deck fasteners? Then view our full range of decking clips. Or see our extensive range of deck screws for when you prefer to fix your decking boards with screws.