Strike plates for mortice lock Straight Galvanised- Per piece

A separate strike plate for mortice locks is the ideal solution when you only need to replace the strike plate. This Straight strike plate is made of Galvanised Steel and therefore very strong! Due to its 2 slots, where the latch and dead bolt will fall in, this lock is suitable for both bathroom locks and a mortice lock.

Striking plates loose mortice locks / bathroom locks

The best way to install these strike plates is with our Galvanised Torx 10 screws, which you will find in the corresponding articles. This screws the plate onto the frame. Beforehand, use a sharp wood chisel to make recesses in the frame where the day and night locks will fall. Measure the required depth well in advance and chisel a Couple of mm deeper so that everything works smoothly. After installing the strike plates, your frame will be neatly finished again after which you hammer the protruding lip around the frame. This will protect the frame from your protruding latch of the mortise lock.

Ordering strike plates

Order this straight strike plate loose for mortice locks at Wovar extra cheap. Do you have a construction or handyman business? In our extensive range of locks you will also find other locking solutions such as flush bolts, espagnolettes and other mortise locks.

In our extensive range of locks you will also find other locking solutions such as flush bolts, espagnolettes and other mortise locks.