T-Hinge Light Blue Galvanised 500 mm

This T-hinge light version of blue galvanised steel has handy mounting holes. The T-hinge has a length of 500 mm, a width of 36 mm and a thickness of 2 mm. You can easily mount this T-hinge with the galvanised chipboard screws from Wovar with a thickness of 4.0 mm. These fit perfectly into the mounting holes of the blue galvanised T-hinges.

Mount extra strong T-hinges

To attach the T-hinge extra firmly, you can choose to use our galvanised M8 carriage bolts in the square mounting holes. The square part under the semicircular head of our galvanised M8 carriage bolts fits exactly into the square mounting hole of this T-hinge. By tapping the head of the carriage bolt with a rubber hammer, the square part clamps into the wood of the door. To mount M8 carriage bolts you need to drill a hole of 9mm. The M8 carriage bolts can be smoothly passed through here. Predrilling is easy with our hardwood drill bits 9 mm.

Depending on the thickness of the door, carefully determine the length of the screws and bolts. Carriage bolts must protrude approximately 15mm from the door to tighten the washer and nut. With chipboard screws, it is important that they do not protrude from the other side of the door.

To order

Order this light version of blue galvanised T-hinges 500mm each at Wovar. Your supplier in T-hinges. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this T-hinge not quite what you are looking for? View our entire range of T-hinges. See also our complete range of hinges and hooks.