Threaded inserts M4 x 10 mm Galvanised - 20 Pieces

You also need to come to Wovar for threaded inserts M4! Our Threaded Inserts are made of Galvanised Steel, which not only makes it extra strong but also resistant to outdoor use. This screw-in nut is suitable for bolts with a thickness of 4 mm (M4). These nuts can be screwed in with a flat screwdriver. The nominal length of this nut is 10mm. 

What do you use a ramp nut for?

A ramp nut is used to create a solid point in your wood construction into which you can screw nuts. The nut is hollow inside and has a Screw thread on the outside which makes it easy to screw into the wood. With a ramp nut, you can create a solid fastening point in any wooden surface. A ramp nut can also be a solution for other soft materials.

Do I need to pre-drill?

When you want to use threaded inserts, it will always be necessary to pre-drill. Otherwise, it will be impossible to get this thick screw-in nut through the wood (or other material). For pre-drilling in wood, we recommend using hardwood drill bits. While drilling, please note that the drill bit should be a Couple of mm smaller than the screw-in nut itself. For example, for the 4mm nut, use a 7mm hardwood drill bit. This will keep a lot of grip in the wood. While drilling, also think about the angle you want to put the nut in, so that you get the most beautiful finish in your projects. Should it be difficult to screw the nut in with a flat screwdriver, you can also screw a bolt into the nut beforehand, so that you can use the drive of this bolt to screw the nut into the wood. So you can use your own socket or Torx screw tools. 

Order your socket nuts M4 x 10 mm Galvanised

Order these sharp socket nuts at an always competitive price from Wovar. At Wovar you are sure of a quality product at a good price. These nuts are sold in sets of 20 pieces. Business customers enjoy even more benefits, including even more discounts.