Transparent Closet Door Bumper of 10 mm - Per Piece

Looking for a transparent bathroom door or closet door stopper of 10 mm? This 10 mm high and 20 mm wide bathroom door stopper from Wovar is one of our smallest models of door stopper. The impact cap is often used, for example, to prevent damage to walls indoors when doors swing. By attaching a bathroom door stopper at the height of the door handle, the door will come against the stopper cap instead of the wall and thus protect your door and wall against damage. 

Attaching the Bathroom or Closet Door Stopper

The transparent Wovar bathroom door stopper can be attached with a 4 mm screw. For example, choose a Galvanised 4x50 or 4x40 chipboard screw. It can be easily drilled into wood. Do you attach these to hardwood? Then pre-drill the hole. We recommend using a 6x30 nylon plug for mounting on stone or concrete.

Pre-drilling in Stone or Concrete wall 

Determining the drilling depth is very simple. You take the length of the plug and add 1 cm. With this 6x30 mm nylon plug, you drill 4 cm deep. The thickness of the drill is also very important. To do this, take a drill with the same diameter as the plug. In this case 6mm. Screws with a diameter of 3.5 to 5 mm are suitable for this plug. Use our 6mm hammer drills or concrete drills for drilling.

Buy your Transparent Closet Door Stopper 

Is this transparent closet door stop not quite what you are looking for? Then view all our door stops. In addition to doorstops, Wovar also has an extensive range of door holders, monkey tail bolts, and cane bolts for gates and fences.