Wood filler Mahogany Can 125 ml

Buy useful wood filler for sealing your wood? On this page you will find 125ml cans of wood filler in the colour Mahogany. This is a popular colour when sealing holes and cracks on Hardwood. Think Bankirai, Teak and so on! Both indoors and outdoors, this product can be used to fill holes and repair wood. It is not for nothing that professionals often choose Frencken Wood filler when filling wood holes. This is mainly due to the high Quality, fast drying and the fact that this wood filler is very well paintable. You can in fact finish it with both water-based and turpentine-based products. Do you use the wood filler outdoors? Then we always advise to finish the wood filler with a stain, paint or lacquer.

Frencken wood filler in the colour Mahogany

The colour Mahogany is, as already mentioned on this page, a very Popular colour when filling holes and cracks on Hardwood. The colour is close to wood species such as ipe, bangkirai and karibu. Commonly used, for example, to hide deck screws in the garden. Be careful then! We do recommend finishing it then, for example with a good Hardwood Oil. Another colour often used on Hardwood is Meranti. You can clearly see the differences between these two colours on the second image with the product above.

Applying Wood filler from Frencken - This is how to do it!

Before you start applying the wood filler itself, we recommend preparing the surface material properly. This is because it should be free of moisture, dirt and grease. If necessary, you can use a wood cleaner for this. Then you can easily apply the wood filler using, for example, a spatula or putty knife. You can easily order these in our webshop. In some cases, for larger holes, it is better to apply several layers until the right thickness is reached. After drying for 10 hours, it is possible to repaint the wood filler.

Properties of mouldable wood filler

• Base: cellulose nitrate
• Solids: approx. 40% Specific gravity (20 °C): approx. 0.9 g/cm³
• Viscosity: pasty
• Min processing temperature: 10 °C
• Colour wet: Mahogany 
• Colour dry: Mahogany 
• Smell: solvent smell
• Number of components: 1
• Temperature resistance: approx. â€"20 °C to +70 °C
• Moisture resistance: fair (repaint for outdoor use)
• Solid dry after: 20 to 30 minutes
• Sanding and recoatable after: approx. 10 hours
• Use: depending on layer thickness

Attention! The above values are determined at 20 °C/65% RH and a wood humidity of 10%. Deviating conditions will result in other values.