Wood filler Spruce/Rain canister 125 ml

Looking for filler for your Wood in a light colour, but don't have enough with a full 50ml tube? Then you can opt for this 125ml Can. This Wood filler is light in colour and is therefore mainly used for spruce and pine wood. Not for nothing the professional often chooses Frencken Wood filler. They choose it because of its high Quality, fast drying and the fact that it is very well paintable. In this way, Frencken has really made a name for itself in the field of wood fillers. Can be used both indoors and outdoors. For Exterior use, our advice is always to finish with a paint or lacquer for extra water resistance and colour retention.

Colours of Frencken's Wood filler

Currently, you are looking at the kneadable wood in the colour Pine/Pine. The colour of this wood filler is a bit in between and is often used with all softwood species such as Larch, Douglas and cedar, for example. On this page, we sell the wood filler in a 125 ml can, but it is also available in a useful 50 ml tube! Useful for sealing nail holes and screw holes, for example.

Using mouldable wood filler

Before using Kneadable Wood filler, it is first important to prepare the surface material. This is because it should be dry, dust-free and grease-free. If necessary, clean it first with, for example, a wood cleaner. Then use a spatula or putty knife to apply the Wood filler in 1 or more layers, depending on the size of the Surface area to be filled. Remove wet residues as soon as possible with a dry cloth. Cured residues can be removed mechanically. After 10 hours the surface can be painted over. 

Properties of Wood filler

• Base: cellulose nitrate
• Solids: approx. 40% Specific gravity (20 °C): approx. 0.9 g/cm³
• Viscosity: pasty
• Min processing temperature: 10 °C
• Wet colour: Pine/spruce
• Colour dry: Pine / spruce
• Smell: solvent smell
• Number of components: 1
• Temperature resistance: approx. â€"20 °C to +70 °C
• Moisture resistance: fair (repaint for outdoor use)
• Solid dry after: 20 to 30 minutes
• Sanding and recoatable after: approx. 10 hours
• Use: depending on layer thickness

Attention! The above values are determined at 20 °C/65% RH and a wood humidity of 10%. Deviating conditions will result in other values.